slivers

英 [ˈslɪvəz]

美 [ˈslɪvərz]

n.  (切下或碎裂的)小块，薄片
sliver的第三人称单数和复数

柯林斯词典

• N-COUNT 小片;一点儿
  Asliver ofsomething is a small thin piece or amount of it.
  1. Not a sliver of glass remains where the windows were...
     窗户上连一点儿玻璃碎片都没有留下。
  2. There was only one sliver of light in the darkness.
     黑暗中只有一点零星的光亮。

双语例句

• A method to analyze the frequency spectrum of yarns and slivers unevenness signal
  对纱条不匀信号频谱分析的方法
• The test shows that double press bar top pin in back zone draft set has bigger control of slivers in back zone, and can enhance back zone draft ability of spinning frame, increase draft multiple, and enhance fine count yarn quality.
  结果表明：后区附双根压力棒新型上销牵伸装置对后牵伸区须条的控制增强，可以提高细纱机的后区牵伸能力，增大总牵伸倍数，有利于细号纱纺纱质量的提高。
• The fantasies include a delicate mussel and smoked tofu salad and shimmering watercress soup flecked with slivers of razor clam and foie gras.
  推荐的美食包括，精美的熏豆腐贻贝沙拉，以及冒着热气的水田芥汤，饰以蛏子与鹅肝碎粒。
• These slivers can be further reduced in diameter and then twisted and plied in yarns of various sizes using textile machinery and processes similar to those employed for other staple materials.
  这些纱条的直径可以进一步减小，然后经过加捻、合股，采用与其它纤维材料加工类似的工艺，制成不同规格的纱线。
• The second time, however, eight slivers from the first finisher-drawing step are subjected to the same operation. Cotton cloth is made in a cotton mill.
  在进行第二次并条时，第一个并条机生产的八根棉条被送到第二个并条机上进行同样的梳理。
• Slivers from either the carding unit or the combing unit, depending on the ultimate yarn desired, are processed through the finisher-drawing.
  从梳棉机或精梳机下来的棉条，根据对纱线的最终要求，进一步在并条机上加工。
• An isotope method of testing the weight of slivers
  棉条重量的放射性检测方法
• This done, they immersed the slivers in an electrolyte containing sodium ions and put the resulting battery through 400 cycles of discharging and recharging.
  完成这些后，研究人员把木条浸在一种含有钠离子的电解液里，对这种特殊的电池进行了四百次的循环充放电。
• The fruit slivers were placed on a bed of romaine lettuce, topped with croutons and drizzled with walnut oil.
  水果切片被放置在长叶莴苣的底床上，顶端放上面包丁，淋上核桃油。
• Conversion of caster from the curved to the vertical bending one is the most effective measures to eliminate the pipe listers and slivers for cold rolled Ti SULCAK ( Ti-beating extra low carbon steel sheet).
  为了消除TiSULCAK（含Ti超低碳铝脱氧镇静钢）钢冷轧薄板上的铅笔型气泡，将铸机从弧型改为立弯型是最有效的措施；