shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- In physical and mechanical indexes, the basic density, air-dried density, compression strength parallel to grain, MOR, MOE and toughness of mature wood are higher than that of juvenile wood. The shrinkages of juvenile wood are higher than that of mature wood.
在物理力学性质指标中成熟材的基本密度、气干密度、顺纹抗压强度、抗弯强度、抗弯弹性模量及冲击韧性高于幼龄材；而幼龄材全缩率高于成熟材。 - The result shows that there are no casting defects, such as shrinkages, blowholes, and slag inclusions and the quality of casting is steady.
生产结果表明，铸件没有气孔、夹砂、夹渣、收缩等铸造缺陷，铸件品质稳定。 - During the solidification of ductile iron, the volume change can be separated into several stages: after molten iron poured, shrinkages occur along with the temperature descent;
球墨铸铁凝固过程中的体积变化可以分成如下几个阶段：浇注后，铁水随温度的下降，发生液态收缩； - The influences of initial temperatures and the sizes of clusters on the coalescence were revealed by calculating the shrinkages and aspect ratios and by tracking the snapshots of the system configures.
通过对并合体系的收缩因子、纵横比率计算，以及体系构型的跟踪记录，揭示了团簇的初始温度和团簇的尺寸对并合过程影响的一般规律。 - The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良，弯曲强度达到710MPa，断裂韧性达到4.77MPa·m1/2。在完全烧结过程中，各个方向收缩均匀一致。 - The relationship of relative humidity and autogenous shrinkages of reactive powder concrete ( with compressive strength of 200 MPa) with ages were investigated detailed.
通过试验研究了抗压强度为200MPa的活性粉末混凝土在水化过程中内部相对湿度及其自收缩随龄期的变化规律； - The shrinkages in water and dry of the complex polymer fibers are tested through a great deal of experiments. The shrinkage behaviours of the composite PBT/ PET fibers are analysed by means of linear regression method.
通过大量试验研究了复合聚酯纤维的沸水和干热收缩规律，并利用线性回归方法讨论了热收缩速率的变化规律。 - Using simulation experiment, shrinkages of injection molding parts with different thickness are studied. Simulation experiments are performed with same parameter of process condition and fixed gate dimension and position.
采用模拟实验的方法，在相同注射工艺条件下，保持浇口尺寸和位置不变，对不同厚度制品的成型收缩率进行模拟实验研究，绘制了模拟实验曲线。 - Testing method for drying and firing shrinkages of ceramic whiteware clays
陶瓷用粘土干燥收缩率和烧成收缩率测定方法 - Abstract: introduced is the experience in replacing atmosperic riser with thermal-isolation riser and improving pouring system to eliminate shrinkages.
文摘：介绍了用保温冒口代替大气压力冒口，改进浇注系统解决铸件缩孔问题的经验。